ML-2 Optimal Recording Levels

The Classic Instruments microphones are calibrated so that an input signal peaking around -12 to -10dBFS will match the original mic tone most accurately. 

You can use the VMR Trimmer module before the Classic Instruments module to monitor your input level as you record or adjust it later in the mix.

For special effect, you can drive the Classic Instruments Module harder to get more harmonics and tube saturation, and you can further amplify these characteristics with the intensity knob.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request



Article is closed for comments.