Q: Do I need the Slate VMS ONE preamp in order to make this work well?
A: 🎙️ No, the VMS ONE preamp is not required! In most cases, the built-in preamps on your audio interface are clean and transparent enough to avoid coloring the signal. The VMS ONE was used during the modeling process for consistency, but any clean, linear preamp will work great.
Q: Will there be a matched pair bundle?
A: 🎛️ All ML-2s are quality controlled to be matched straight from the factory. We have very strict procedures and even a dedicated anechoic chamber just for ML-2 microphones to ensure consistency.
Q: Can I use the ML-1 with Classic Instruments (ML-2) emulations?
A: 🎤 Yes, you can! However, it may sound slightly different. The Classic Instruments emulations were specifically designed for the ML-2 microphone, so results may vary a little when using the ML-1.
Q: Is Classic Instruments (ML-2 software) included with the All Access Pass?
A: 📦 Classic Instruments (for ML-2) and Classic Tubes (for ML-1) are not included in the All Access Pass. The physical microphones are required to use the software properly. 🎯 The ML-2 microphone ensures the sound source matches the reference used to create the algorithms. Since the software was designed specifically for use with the ML-1, ML-2, and VMS ONE preamp specs, separating the software from the microphones would prevent us from guaranteeing accurate, high-quality emulations.
Comments
Article is closed for comments.